Centro de usinagem para madeira Weinig C4500

Weinig Conturex C4500 CNC Profile Center (for milling, drilling and sawing in transverse and longitudinal machining)
Machine on customers request painted in special green colors!

Description;
Working width 25 - 260 mm
Working height 10 - 150 mm
Short parts must pass through the first two chip elements
be completely clamped. The workpiece must be placed first
both tables will.
Ratio of piece height to piece width: max. 2:1
Table length PowerGrip 3000 mm
Workpiece length 180 - 4500 mm
Workpieces longer than 3300 mm are processed
using a subsequent cycle. With continuous longitudinal profiling this
Workpieces are processed in the subsequent cycle
interrupted, which can result in a visible mark.

02. PowerGrip Introduction
Manual placement of parts
Length and width stop individually programmable
via control
Pneumatic clamping elements, individually controllable
Distance from 1st to 2nd tension element 60mm
everything further 150mm

Adjustment speed VX to 110 m/min.
Automatic workpiece transfer to the PowerGrip outlet
Piece width after processing max. 130 mm

1e processing unit
Motor with brake 20 KW (27 HP) S 1
Tool carrier HSK 63F
Speed electronically adjustable 0 - 18,000 rpm.
Direction of rotation right - left
Tool diameter max. 330mm
Tool diameter saw blade max. 280mm
Tool length max. from zero edge HSK F 63 290mm
Adjustment speed VZ to 60m/min.
Adjustable speed VY to 120 m/min.
Adaptation speed VC to 450°/sec.
Tool magazine
Number of tools to install 18
Distance from the tool places 100mm
Weight per tool slot max. 10kg
Total weight of the attachments
in the tool magazine max. 130kg

2e processing unit
Motor with brake 20 KW (27 HP) S 1
Tool carrier HSK 63F
Speed electronically adjustable 0 - 18,000 rpm.
Direction of rotation right - left
Tool diameter max. 330mm
Tool diameter saw blade max. 280mm
Tool length max. from zero edge HSK F 63 290mm
Adjustment speed VZ to 60m/min.
Adjustable speed VY to 120 m/min.
Adaptation speed VC to 450°/sec.
Tool magazine
Number of tool locations 18
Distance from the tool places 100mm
Weight per tool slot max. 10kg
Total weight of the attachments
in the tool magazine max. 130kg

PowerGrip spout
Automatic workpiece holding of the PowerGrip inlet
Pneumatic clamping elements, individually controllable
Distance from the 1st to the 2nd clamping element 60 mm
every additional 150 mm
Adjustable speed VX up to 110 m/min.
Automatic piece output at the dispensing device
Slanted drain, up to the end stop.
No automatic check.
Buffer length approx. 800 mm